PA

ADL Sewage Pump – Submersible Wastewater Pump Manufacturer

Hung Pump Group proudly presents the ADL Series Submersible Sewage Pumps, designed for reliable wastewater management in residential, commercial, and industrial applications.

Features of the ADL Sewage Pump

1. All cast-iron sewage pumps. Highly efficient heat-conducting material.
2.  All cast-iron seal plates have a double mechanical seal. There is no leaking issue.
3. 4-8 pole motor, high torque, suitable for high viscosity liquid transporting.
4. Available in 1HP to 60HP configurations
5. Anti-clogging channel-type impeller for slurry and solid content
6. IP68 motor protection
7. CE certified (TÜV-approved motor options)
8. High-efficiency dry motor

Features

1. The cooling water jacket ensures water flows between the reach and barrel, creating an excellent cooling effect, reducing the minimum operating water level, and
increasing the pumpable water level.
2. Dry motor design, full cast iron motor casing with dual SiC mechanical shaft seals, excellent waterproof structure, and long service life.
3. A high-chromium (HCR) agitator at the bottom of the pump creates a powerful agitating current when activated, lifting the sediment and discharging it.

HEAVY DUTY DRY PIT PUMP

GFV Series

• POWER RANGE: 5~20 HP
• MAX. FLOW CAPACITY: 420 ~ 980GPM (1600 ~ 3700 LPM)
• MAX. HEAD: 55 ~ 75 FT (17 ~23 M)
• 4 Pole motor for larger flow capacity.
• High-hardness Impeller for longer service life.
• Water-cooled motor to ensure a long life in continuous and
intermittent operation, with high efficiency and energy savings.
• Applicable for both dry and wet pits.

While most of our pumps are submersible, the GFV Series can be used both submerged and on land. This model is ideal for confined spaces, like sewerage engineering projects, where other pumps may be too large. The GFV can be hung vertically for dewatering tasks, saving space. Its special outer casing provides full water cooling to prevent overheating, and the side water outlet helps protect the motor casing from abrasive damage caused by sand and stones.

Slurry pumps for construction

Key Features 

• Efficient Cooling Design: Top and side discharge outlets allow water to cool the motor, making it ideal for continuous-duty operation.
• Durable Cast Iron Build: Full cast iron housing with a dry motor and dual SiC mechanical seals for long-lasting waterproof protection.
• High-Chromium Agitator: Powerful agitator stirs and lifts sediments, perfect for handling sludge and abrasive fluids on construction sites.
• Top Discharge Design: Compact and efficient — fits tight spaces and ensures constant cooling during extended use.
• Advanced Seal Protection: Double SiC seals in an oil chamber, lip seal barrier, and shaft sleeve to guard against wear, abrasives, and leaks.
• Reliable Motor Performance: Class F insulation with thermal overload protection for safe, high-temperature operation.
• Sealed Cable Entry: Enhanced sealing keeps water and debris out, boosting reliability in harsh environments.

Water Cooling Dewatering Intake Pump

The KF Series is a water cooling dewatering intake pump with an agitator, built to handle sand, mud, and slurry water. Ideal for construction sites, mining, river dredging, and other heavy-duty dewatering projects, the KF pump provides durable and efficient performance in the most demanding environments.

Features:

1. The use of side and top outlets allows water to flow between the motor and the casing, creating a cooling effect.
2. Dry motor design, full cast iron motor casing with dual SiC mechanical shaft seals, excellent waterproof structure, and long service life.
3. A high-chromium (HCR) agitator at the bottom of the pump creates a powerful agitating current when activated, lifting the sediment and discharging it.

NDV Heavy Duty Slurry Sand Agitator Pump

Output: 20~60HP

Features:

• Dry motor design, full cast iron motor casing with dual SiC mechanical shaft seals, excellent waterproof structure, and long service life.
• The outer shell of the motor is designed in the shape of a blade, which helps to cool down the heat of the motor.
• Heavy Duty Design

KT Water Cooled Construction Pump

Features:

1. The top of the water effectively cools the motor, to achieve the effect of motor cooling
2. The impeller is made of high chrome steel to achieve superior abrasion resistance

Heavy Duty Slurry and Sand Pump.

Our GF series pumps are specially designed for sand and mud water discharge. Equipped with an agitator and thicker shaft, this pump can conduct sand and slurry removal. This pump comes in two models, 15 and 20hp, with a 4-pole motor and equipped with a whole water-cooled design

Features:

1. High Chrome Impeller & Agitator
2. High Chrome Wear Plate / Suction Cover
3. High Performance Dry Motor
4. Could Handle upto 40% Sand Percentage
5. Equipped with air ball valve & Pressure Relief
6. Could Operate in low water level