HUNG PUMP LOGO HUNG PUMP LOGO
BAV
BAV Non Clogging Sewage and Sump Pump BAV Non Clogging 3D View BAV Strainer Bottom View BAV Strainer View BAV Vortex Non- Clog Impeller BAV Accessories
BAV Non Clogging Sewage and Sump Pump BAV Non Clogging 3D View BAV Strainer Bottom View BAV Strainer View BAV Vortex Non- Clog Impeller BAV Accessories

BAV

Liquid temperature:0~40℃ / 32~104℉
HP Range:1/5~3/4HP / 150~550W
PH Range:6~8
Rated Speed:2900 / 3450 rpm
Protection class:IPX8
Maximum depth:10M


Key Features

  1. Cable gland water resistance treatment, no leaking issue
  2. Optional removable strainer for sewage uses
  3. Non-clogging vortex impeller, the maximum passing solid is 35mm



Key Application

  1. Sump pit, wastewater drainage
  2. Industrial Sewage
  3. Elevator pit
  4. Basement and Storage Area Drainage
  5. Fish Pond and Garden Areas
  6. Small Scale Agriculture

Sump Pump Application


BAV Non Clogging Pump Specification

Model No.BAV-150BAV-250BAV-400BAV-550
OutputHP 1/5 1/3 1/2 3/4
W150250400550
Outletmm32405050
inch1-1/4"1-1/2"2"2"
Pass Solid Dia (mm)10253035
Max. Flow (LPM) 160200300340
LPM Flow @ Head1.5M150190290330
3M115160270305
4.5M60120235270
6M-70185225
7.5M-15125170
Max. Head (M)681012
Dimension (mm) L x W x H181 x 132 x 305197 x 135 x 315225 x 146 x 350225 x 146 x 365
Weight (KG)691112

Remarks: Model No. ends with "S" is included with a stainless steel strainer for dirty water discharge.

Remarks: Model No. ends with "A" is equipped with a float switch.


BAV Non Clogging Pump Dimension

BAV Dimension


BAV Non-Clogging Pump Performance Curve

BAV Curve


BAV 3D Drawing


BAV CE&CSA Certification

Recommend

TAS Drainage Pump

TAS

Key Features

1. All cast-iron sewage pumps. Highly efficient heat conduct material.

2. All cast-iron seal plates with double mechanical seals. No leaking issue.

3. 2-pole motor, high volume.

KSL Submersible High Flow Pumps

KSL

Key Features 

  1. Large flow design.
  2. Double mechanical seal design.
  3.  Rubber bearing cover prevents water leak in and extend the lifetime.
KHL High Head Pump

KHL

Feature

  1. High Pressure high pass solid (15mm)
    Semi-open impeller design enhances the passage of solids.
  2. Elbow-shaped pump casing design.
  3. Cable gland water resistance treatment :
    increase waterproofing and convenient to replace.
  4. Motor Winding: H-Class
DSP Series sewage pump with cutter impeller for heavy-duty wastewater applications

DSPK

Cutter/Shredder Pump


Features
1. The seal and flow channel are separated to reduce negative pressure.
2. Solid single-channel impeller, strong liquid carrier.
3. The material of the impeller and base plate is FCD45. (Hardness treatment:58)
4. H class motor insulation.(180°C)
5. The cutter is made of tungsten steel.

Jet Aerator Pump

Jet Aerator

JA Series Submersible Jet Aerator

Features:

  • High oxygen transfer rate, BOD is easy to remove from wastewater treatment
  • BOD is easy to remove from wastewater treatment
  • Good Mixing Effect
  • Provide coarse/Air Bubble Generation
  • Mixing and stirring applications for uniform MLSS due to fine bubbles convention
  • Non-Clog Vortex Impeller

Product Range: 0.5Hp～7.5Hp

KSV Dirty Water Pumps

KSV

KSV Pump Features

  1. Suspended impeller design can prevent the stock by foreign matter.
  2. A double mechanical seal gives a double mechanical long service life.