Unit Converter

Professional Pump Unit Converter

Free Online Pump Unit Converter by Hung Pump

Looking for a fast and accurate way to calculate pump specifications? The Hung Pump Unit Converter is a free online tool specifically designed for engineers, technicians, and industrial professionals. Whether you are calculating pump flow rates, pressure, motor power, temperature, or pump head, our tool simplifies the process and saves you valuable time.

Essential Conversions for Industrial Applications

Selecting the right pump and ensuring optimal system performance requires precise calculations. Our comprehensive converter supports both metric and imperial units, allowing you to easily switch between standard industry measurements:

Flow Rate Conversions: Convert LPS to m³/h, GPM to L/min, and more.
Power Conversions: Easily calculate HP to kW or kW to HP for accurate motor sizing.
Pressure & Head Conversions: Seamlessly convert Bar to PSI, meters of head to PSI, and other pressure metrics.
Temperature Conversions: Quick Celsius to Fahrenheit calculations.

Built for Engineers & Technical Professionals

Accurate unit conversion is critical when preparing technical documentation, designing pipelines, or performing energy efficiency assessments. Beyond standard conversions, this tool also provides quick reference guides for SI prefixes and motor insulation classes, helping you ensure strict compliance with international industry standards.

Streamline Your Workflow Today

Avoid costly calculation errors, especially on international projects where unit discrepancies often occur. Try the Hung Pump Unit Converter today to verify your calculations, improve accuracy, and make informed decisions for your next pump installation or system upgrade.

Frequently Asked Question

General Pump Calculations & FAQ

1. How do I convert Pump Head (meters) to Pressure (PSI or Bar)? To convert Total Dynamic Head (TDH) to pressure, you must account for the specific gravity of the liquid. For clean water at 20°C:

To PSI: Multiply the head in meters by 1.422.
To Bar: Multiply the head in meters by 0.0981.

Formula:
$Pressure (Bar) \approx \frac{Head (m)}{10.197}$

2. What is the difference between GPM (US) and GPM (UK/Imperial)? It is critical to distinguish between these two units in international projects to avoid under-sizing your pump:

1 US Gallon $\approx$ 3.785 Liters.
1 Imperial (UK) Gallon $\approx$ 4.546 Liters.
Our converter defaults to US GPM, which is the standard used in most Hung Pump and international industrial catalogs.

3. Why is motor power conversion (HP to kW) important for pump selection? Mismatched power ratings can lead to motor burnout or energy waste. In the pumping industry, we use the mechanical horsepower standard:

1 HP (Mechanical) $=$ 0.7457 kW.
When selecting a Variable Frequency Drive (VFD) or starter, engineers often round up to the nearest standard motor size (e.g., a 1.2 HP requirement would necessitate a 1.5 HP or 1.1 kW motor) to handle starting torque and fluid viscosity variations.

4. What are the common units for Pump Flow Rate? Depending on your region and application, flow rates are measured in:

LPS (Liters Per Second): The standard for fire-fighting pumps and small plumbing.
m³/h (Cubic Meters Per Hour): The universal standard for large-scale industrial, agricultural, and municipal water systems.
GPM (Gallons Per Minute): Primarily used in North American residential and irrigation sectors.

5. How does temperature affect pump performance and NPSH? While our tool provides Celsius (°C) to Fahrenheit (°F) conversions, remember that as temperature rises, the NPSH (Net Positive Suction Head) requirement changes. High temperatures increase vapor pressure, which can lead to cavitation—the formation of vapor bubbles that damage the impeller. Always check if your pump has Class F (up to 155°C) or Class H (up to 180°C) insulation for hot fluid applications.

6. What is the standard SI unit for Pressure in the pump industry? The official SI unit is the Pascal (Pa). However, because 1 Pa is extremely small, the industry typically uses:

Bar: ( $1 \text{ Bar} = 100,000 \text{ Pa}$ ).
kPa / mPa: Common in technical datasheets.
PSI: Still the dominant measurement in the US and many parts of Southeast Asia.

7. How do I calculate the Water Horsepower (WHP)? To find the actual power delivered to the fluid, use this simple formula:

Formula:
$WHP = \frac{Flow (GPM) \times Head (ft)}{3960}$
To get the required Brake Horsepower (BHP), you must divide the WHP by the pump's efficiency (usually 60-80%).

Back to list