TPV
TPV
Features
1、High pass solid design 32mm with suspending vortex impeller design allows a pass solid 32mm.
2、Water cooling design and efficient cooling method for continuous running.
3、All plastic designs are to avoid corrosion issues.
4、Plug Pin Cable enhances leakage resistance and easy cable replacement.
- Garden landscape
- Fish pond circulating
- 24-hour operation in a water environment
| Model No. | Output | Outlet | Solid Pass(mm) | Max Flow (LPM) | LPM Flow @ Head | Max Head(M) | Weight | ||||||
| HP | W | mm | inch | 2M | 3M | 4M | 5M | 6M | Kg | ||||
| TPV-200 | 1/4 | 200 | 32 | 1-1/4" | 19 | 140 | 120 | 100 | 80 | 55 | 30 | 7 | 3.6 |
| TPV-600 | 3/4 | 600 | 32 | 1-1/4" | 32 | 240 | 225 | 190 | 145 | 95 | 35 | 6.5 | 8 |
| Remarks: Model No. ends with "S" is for sea water, with "A" is equipped with float switch | |||||||||||||
Recommend
SWO
Key Features
1. All the material is stainless steel. No rusty issue.
2. Stainless Steel Open Impeller.
3. It can endure light acid and alkali.
SS
Feature
1、The material is stainless steel which can endure light acid and alkali.
2、The waterproof material is all use VITON.
3、The shaft material is SUS316.
4、Motor-cooling design.
KSL
Key Features
- Large flow design.
- Double mechanical seal design.
- Rubber bearing cover prevents water leak in and extend the lifetime.
BAS
Key Features
- Waterproof Cable Entry – Specially designed cable sealing prevents leakage and ensures long-term safe operation.
- Suspended Impeller Design – Reduces wear and increases efficiency by minimizing contact with solids.
- One-Piece Stainless Steel Motor Casing – Corrosion-resistant and built for extended service life in harsh environments.
Jet Aerator
JA Series Submersible Jet Aerator
Features:
- High oxygen transfer rate, BOD is easy to remove from wastewater treatment
- BOD is easy to remove from wastewater treatment
- Good Mixing Effect
- Provide coarse/Air Bubble Generation
- Mixing and stirring applications for uniform MLSS due to fine bubbles convention
- Non-Clog Vortex Impeller
Product Range: 0.5Hp～7.5Hp
RV
Features
- Pin & Plug-in cable entry for water resistance and easy replacement
- Pump Housing, Impeller, and Motor Housing are made of Thermoplastic.
- The pass solid is 18mm.