Products
Hung Pump offers a wide range of water pumps from 1/10 HP to 75 HP, designed to cover diverse applications such as clean water, gardening, sewage & wastewater, agriculture, construction sites, swimming pools, and pressure boosting systems. With over 35 years of experience, our pumps are trusted for their durability and reliability in both residential and industrial use.
SV
Feature
1、Non-clogging vortex impeller.
2、Suspended impeller and high efficacy flow channel design, no blocking. The pass solid is 40mm.
SB
Technical Specifications
- Liquid Temperature: 0~40°C
- Horsepower Range: 0.5~7.5 HP / 0.4~5.5 kW
- pH Range: 5~9
- Rated Speed: 2-Pole, 2900 / 3450 RPM
- Protection Class: IPX8
- Maximum Submersion Depth: 10 meters
Key Features
- Non-clogging vortex impeller ensures smooth operation with minimal blockage.
- Suspended impeller with high-efficiency flow channel; capable of passing solids up to 50mm.
- Durable stainless steel (316/304) construction that resists light acid and alkali corrosion.
- Designed for sewage and corrosive liquid applications.
- Low maintenance and long-lasting performance.
SDP
The SDP Series is a water-cooled stainless steel submersible industrial pump, designed for continuous duty in construction, tunneling, dewatering, and industrial wastewater management. With stainless steel construction, it ensures long-lasting resistance against wear and corrosion, while its water-cooled motor design allows reliable performance even under demanding conditions.
Key Features
1、All the material in contact with water is stainless steel. No rusty issue.
2、Motor-cooling design & 24 hours operation.
3、Upper inlet design ensures the motor operates in a low water level.
SS
Feature
1、The material is stainless steel which can endure light acid and alkali.
2、The waterproof material is all use VITON.
3、The shaft material is SUS316.
4、Motor-cooling design.
SWO
Key Features
1. All the material is stainless steel. No rusty issue.
2. Stainless Steel Open Impeller.
3. It can endure light acid and alkali.
TAS
Key Features
1. All cast-iron sewage pumps. Highly efficient heat conduct material.
2. All cast-iron seal plates with double mechanical seals. No leaking issue.
3. 2-pole motor, high volume.
GC
Feature
1、The cutter material is SUS440C.
2、All cast-iron sewage pumps. Highly efficient heat-conducting material.
3、All cast-iron seal plates with double mechanical seals. No leaking issue.
| Liquid temperature | 0~40℃ / 32~104℉ | ||
| HP range | 0.7~7.5HP / 0.55~5.5KW | ||
| PH | 6~8 | ||
| Rated Speed | 2900 / 3450 rpm | ||
| Protection class | IPX8 | ||
| Maximum depth | 8M | ||
GDH
Key Feature
- The Cutter Material is HCR(High Chrome).
- Stainless Steel Motor housing.
- High-head Grinder Pump.
- H-Class Motor Winding
- Double Bearing for Longer Service Life
DSP
Features
1、The seal and flow channel are separated to reduce negative pressure.
2、Solid single impeller, strong liquid carrier.
3、The material of the impeller and base plate is FCD45. (Hardness treatment:58)
4、H class motor insulation.(180°C)
5、The cutter is made of tungsten steel.
RSV-40A
THERMOPLASTIC SEWAGE PUMP
The RSV-40A is a thermoplastic submersible sewage pump, engineered for domestic and light industrial wastewater applications. Made with high-grade thermoplastic materials, this pump is corrosion-resistant, lightweight, and durable, making it ideal for pumping dirty water, sewage, and drainage in households, farms, and small industries.
• POWER RANGE : 1/2HP
• CAPACITY:4750 GPH
• Steady bottom base for reliable sewage installation
• Rugged oil-filled motor
• Thermoplastic and aluminum construction
• Non-clogging vortex impeller
• 2-in discharge with 2-in solids handling capacity
GFV
HEAVY DUTY DRY PIT PUMP
GFV Series
• POWER RANGE: 5~20 HP
• MAX. FLOW CAPACITY: 420 ~ 980GPM (1600 ~ 3700 LPM)
• MAX. HEAD: 55 ~ 75 FT (17 ~23 M)
• 4 Pole motor for larger flow capacity.
• High-hardness Impeller for longer service life.
• Water-cooled motor to ensure a long life in continuous and
intermittent operation, with high efficiency and energy savings.
• Applicable for both dry and wet pits.
While most of our pumps are submersible, the GFV Series can be used both submerged and on land. This model is ideal for confined spaces, like sewerage engineering projects, where other pumps may be too large. The GFV can be hung vertically for dewatering tasks, saving space. Its special outer casing provides full water cooling to prevent overheating, and the side water outlet helps protect the motor casing from abrasive damage caused by sand and stones.
GF
Heavy Duty Slurry and Sand Pump.
Our GF series pumps are specially designed for sand and mud water discharge. Equipped with an agitator and thicker shaft, this pump can conduct sand and slurry removal. This pump comes in two models, 15 and 20hp, with a 4-pole motor and equipped with a whole water-cooled design
KF
Water Cooling Dewatering Intake Pump
The KF Series is a water cooling dewatering intake pump with an agitator, built to handle sand, mud, and slurry water. Ideal for construction sites, mining, river dredging, and other heavy-duty dewatering projects, the KF pump provides durable and efficient performance in the most demanding environments.
Features:
- The use of side and top outlets allows water to flow between the motor and the casing, creating a cooling effect.
- Dry motor design, full cast iron motor casing with dual SiC mechanical shaft seals, excellent waterproof structure, and long service life.
- A high-chromium (HCR) agitator at the bottom of the pump creates a powerful agitating current when activated, lifting the sediment and discharging it.
KT
KT Water Cooled Construction Pump
Features:
- The top of the water effectively cools the motor, to achieve the effect of motor cooling
- The impeller is made of high chrome steel to achieve superior abrasion resistance